HOME NETWORKING

today almost every home has more than one computer. when we want all the computers connected to each other, we should spend more money to pay the network installer. but you can do this by yourself to reduce unnecessary costs. Its is so easy and simple.

to connect 2 computers or make a small or large computer networks there are 2 main things that needs to be done:

is a type of network cables that use copper base material, which is not equipped with an internal shield. UTP is the most common type of cable is often used in the local network (LAN), because it's low price, flexibility and performance that showed relatively good.

RJ 45 is a registered jack. For computer networks generally use an 8 pin

Crimping tool is a tool to install the UTP cable into the RJ-45 / RJ-11 depending on needs. The shape is there are various large with many functions, such as could cut the cable, stripping and so forth. There also is intended only to crimp RJ-45 or RJ-11 only

It is a tool to divide one network into many PC networks 2atau more

In computer connection, known as 2 pieces of  type of UTP cable connection, which is a straight cable and crossover cable. The function of each type of connection is different.

1.      Straight cable used to connect computers  to  a hub / router

2.      crossover cable used to connect computers to a computer or in certain cases be used to connect the hub to hub.

for home / small networks, generally using a straight cable connection, this is because there are many computers must be connected so that each computer must be connected trough switch HUB. This image represent a Straight Ethernet Cable (Ethernet patch Cable) and Crossover Cable.

After you are already preparing connecting device, you can connecting all your computer following this configure :

TCP/IP is named from two of the most important protocols in it: the Transmission Control Protocol (TCP) and the Internet Protocol (IP)